# 13 Best Free Cursor Tools in 2026: Rules Generators, Token Counters & Config Converters

> 13 free Cursor tools ranked: AgenticKit's rules generator and commands builder alongside DevToolLab, Cursor's built-in generator, Blume and Cursor Directory.

Canonical: https://www.agentickit.co/blog/free-cursor-tools-2026
Last updated: 2026-10-28

**Short answer:** most results for "cursor rules generator" are template libraries you copy and edit by hand, not actual generators. Below are 14 free tools worth bookmarking before you settle on one — AgenticKit's own rules generator, commands builder, config converter and token counter, plus real competitors like DevToolLab, Cursor's built-in `/Generate Cursor Rules`, Blume's rules scorer, and Cursor Directory — with what each one actually outputs so you stop guessing.

## Why most "cursor rules generator" results are templates, not generators

Search "cursor rules generator" and most of what comes back is a static page of pre-written `.cursorrules` snippets for React, Python, or Next.js that you paste into your repo and edit by hand. That's a template library, not a generator. A generator takes your inputs (stack, strictness, framework choices) and produces a file tailored to them, right there in the browser, with nothing to copy from someone else's project first.

The distinction matters because the three formats agent tools actually read are not interchangeable:

- **`.cursorrules`** — a single legacy file at the repo root, Cursor-only, no file scoping.
- **`.mdc` files in `.cursor/rules/`** — Cursor's current format, with `description`, `globs` and `alwaysApply` frontmatter so a rule only loads for matching files.
- **`AGENTS.md` / `CLAUDE.md`** — plain markdown read by Claude Code and other agent tools, no frontmatter, one file for the whole repo.

A tool that outputs the wrong format for your editor is a dead end no matter how good the content is. Below, each tool is marked with what it actually produces.

## 14 tools, ranked

| # | Tool | What it outputs | Free? | Notes |
| --- | --- | --- | --- | --- |
| 1 | [AgenticKit Cursor Rules Generator](/tools/cursor-rules-generator) | `.mdc` files, `SKILL.md`, or `AGENTS.md` | Yes, no signup | Picks your stack (framework, DB, auth, payments, tests), generates glob-scoped files under 50 lines each, grades the output inline |
| 2 | [AgenticKit Cursor Commands Builder](/tools/cursor-commands-builder) | `.cursor/commands/<name>.md` | Yes, no signup | Describe a task in plain English, pick a category, download a ready slash command with numbered steps |
| 3 | [AgenticKit Rules File Grader](/tools/rules-grader) | A score + fix list (no file generated) | Yes, no signup | Drop an existing `.mdc` or `.cursorrules` file, get a score out of 100 and exact lines to fix |
| 4 | [AgenticKit Config Converter](/tools/config-converter) | Converts between `.cursorrules`, `.mdc`, `AGENTS.md` | Yes, no signup | For when you already have a file in the wrong format for your tool |
| 5 | [AgenticKit Hooks JSON Builder](/tools/hooks-builder) | `.cursor/hooks.json` | Yes, no signup | Visual builder for Cursor hooks (format-on-save, protect-file patterns); avoids hand-written JSON syntax errors |
| 6 | [AgenticKit MCP Config Checker](/tools/mcp-checker) | Findings on `.cursor/mcp.json` (no file generated) | Yes, no signup | Catches wrong keys, missing fields, and placeholder values before you commit a broken MCP config |
| 7 | [AgenticKit Multi-Model Token Counter](/tools/token-counter) | Token count + cost estimate (no file) | Yes, no signup | Paste a prompt, see token count and $ cost across Claude, GPT and Gemini side by side |
| 8 | [AgenticKit Package.json Auditor](/tools/package-auditor) | Findings on `package.json` (no file generated) | Yes, no signup | Flags missing scripts, loose version ranges, and gaps against common SaaS essentials |
| 9 | [AgenticKit Agent Brief Generator](/tools/agent-brief) | `agent.md` | Yes, no signup | Pick a preset (reviewer, debugger, test-runner), edit fields, download a valid agent definition |
| 10 | [AgenticKit Skill Token-Cost Estimator](/tools/skill-token-cost) | Findings on a `SKILL.md`/`CLAUDE.md` file (no file generated) | Yes, no signup | Paste or drop a skill file, see its estimated token cost, share of a 200K context window, and which sections to split out |
| 11 | Cursor's built-in `/Generate Cursor Rules` | `.cursor/rules/*.mdc` | Yes, built into Cursor | Runs inside the editor and writes rules from your existing codebase patterns rather than a form; good for retrofitting rules onto a project that has none |
| 12 | [DevToolLab cursorrules generator](https://devtoollab.com/tools/tags/cursorrules-generator) | `.cursorrules` template text | Yes, with paid upsells elsewhere on the site | A template-selection tool: pick a stack tag, get a pre-written block to copy in; not a from-scratch generator |
| 13 | Blume rules scorer (community tool) | A score (no file generated) | Varies | Scores an existing rules file for quality; comparable in purpose to AgenticKit's grader, worth cross-checking a file against both before trusting either score |
| 14 | [Cursor Directory](https://www.codaone.ai/skills/cursor-directory) | Community-submitted `.cursorrules` / `.mdc` files to browse and copy | Yes | A library, not a generator — closest to the "template, not generator" problem this post opened with; useful for ideas, not for output tailored to your stack |

A few of these (DevToolLab, Blume, Cursor Directory) are independent projects AgenticKit doesn't operate; functionality and pricing on third-party sites can change without notice, so verify current behavior on their pages before relying on them.

## What each tool actually outputs

This is the part most listicles skip, and it's the part that determines whether a tool is useful to you in the next ten minutes:

- **If you need a file for `.cursor/rules/` today**, the AgenticKit Rules Generator or Cursor's built-in `/Generate Cursor Rules` are your two real options — one works from a form, the other reads your existing code.
- **If you already have a `.cursorrules` or `.mdc` file and just want to know if it's any good**, use the Rules File Grader (or Blume's scorer as a second opinion) rather than a generator.
- **If you have a file in the wrong format** — say a `.cursorrules` you want as `AGENTS.md` for Claude Code — the Config Converter does that one job and nothing else.
- **If you want a slash command, not a rule**, none of the rules generators above help; use the Commands Builder instead. A rule applies automatically to matching files; a command only runs when you type its name.
- **If you just want ideas to adapt by hand**, Cursor Directory and DevToolLab are template libraries — fine for inspiration, not for a file scoped to your specific stack.

## Free vs. paid: what you're actually paying for

Every tool listed above that AgenticKit built is free with no signup, because they run entirely in your browser — there's no server cost to recoup from you. The same is true for most of the individual tools on this list (DevToolLab's generator, Cursor's built-in command, Cursor Directory's browsing).

Where paid options show up in this space is adjacent to these tools, not inside them: Gumroad "mega-pack" bundles of hundreds of pre-written `.cursorrules` files, paid Cursor rule marketplaces, and premium tiers on template sites that gate the better templates behind a price. Paying for those buys you curation and volume — someone did the work of writing and organizing many rule files. It does not buy you a file tailored to your stack; that's what a generator does for free. If a $20 pack and a free generator would produce comparably specific output for your repo, the generator is the faster path.

## Pick one in 30 seconds

1. **Do you have an existing rules/config file?** → Yes: go to the [Rules File Grader](/tools/rules-grader) or [Config Converter](/tools/config-converter) depending on whether you need a score or a format change. → No: continue.
2. **Do you want a rule (auto-applies to matching files) or a command (runs when you type its name)?** → Rule: [Cursor Rules Generator](/tools/cursor-rules-generator). → Command: [Cursor Commands Builder](/tools/cursor-commands-builder).
3. **Want Cursor to infer rules from code you've already written instead of a form?** → Use the built-in `/Generate Cursor Rules` inside Cursor.
4. **Just browsing for ideas, not ready to generate anything yet?** → Cursor Directory or DevToolLab.

For the file format details (frontmatter fields, the four apply modes, `.cursorrules` vs `.mdc`) see [Best Cursor Rules for Next.js and SaaS in 2026](/blog/best-cursor-rules-2026).

## FAQ

**What's the difference between a cursor rules generator and a template library?** A generator takes your inputs (stack, framework, strictness) and produces a file scoped to them in your browser. A template library gives you pre-written files to copy and edit by hand. Most search results for "cursor rules generator" are actually template libraries.

**Does a free online tool upload my code?** The AgenticKit tools listed here run entirely in-browser and upload nothing — check the FAQ on each tool's page for specifics. For third-party tools, read their own privacy notes before dropping in a real file.

**Should I use `.cursorrules` or `.mdc` in 2026?** `.mdc` files in `.cursor/rules/` are current and support per-file scoping via `globs`. `.cursorrules` is a single legacy root file with no scoping. Prefer `.mdc` for new projects; the Config Converter can migrate an old `.cursorrules` file.

**Is Cursor's built-in `/Generate Cursor Rules` better than a standalone generator?** They solve different starting points. The built-in command reads your existing codebase and infers conventions, which is strong when you already have real code and no rules. A standalone generator like AgenticKit's is faster when you're starting a project from a blank stack picker, before there's meaningful code to infer from.

**Do these tools work for Claude Code too, not just Cursor?** The AgenticKit Rules Generator can export `AGENTS.md`, which Claude Code and other agent tools read directly. The Config Converter can also turn a `.cursorrules` or `.mdc` file into `AGENTS.md`.

## Drop-in AgenticKit install

If you'd rather install a full set of rules, skills and commands instead of generating them one file at a time, AgenticKit ships 34 agents, 61 skills and 47 commands with one command:

```bash
npx agentickit-cursor init --target cursor
```

Browse the [free tools](/tools), the [skills](/skills), or see [pricing](/pricing).

## Sources

Tool capabilities and formats described above reflect each tool's own product pages as of 2026-10-28. Third-party tool listings (DevToolLab, Cursor Directory, Blume) were not independently load-tested; verify current pricing and output format on their own sites before relying on them.


## Related
- [cursor-rules-generator](https://www.agentickit.co/tools/cursor-rules-generator)
- [cursor-commands-builder](https://www.agentickit.co/tools/cursor-commands-builder)
- [rules-grader](https://www.agentickit.co/tools/rules-grader)
- [config-converter](https://www.agentickit.co/tools/config-converter)
- [token-counter](https://www.agentickit.co/tools/token-counter)
- [tech-lead](https://www.agentickit.co/agents/tech-lead)
- [seo-specialist](https://www.agentickit.co/agents/seo-specialist)
- [project-conventions](https://www.agentickit.co/skills/project-conventions)
- [on-page-seo](https://www.agentickit.co/skills/on-page-seo)
- [/audit](https://www.agentickit.co/commands/audit)
- [/ship](https://www.agentickit.co/commands/ship)
